Skip to main content
Log in
66507-9 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE Connectivity 66507-9 AMPLIMITE HDP-20 Stamped Pin Contact

MPN66507-9
Active

TE Connectivity AMPLIMITE HDP-20 series, 66507-9, stamped pin contact, crimp termination, 24-28 AWG, gold plating 30.0µin (0.76µm), brass contact material, bulk packaging.

$0.3400Ref. price · indicative, final on quote
66507-9 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

66507-9 Technical Specifications
ParameterValue
TypeStamped
SeriesAMPLIMITE HDP-20
Wire gauge24-28 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

Contact construction and wire range

The TE Connectivity 66507-9 is a stamped pin contact from the AMPLIMITE HDP-20 series, designed for crimp termination onto 24-28 AWG wire. The brass base material is plated with 30.0µin (0.76µm) of gold on the mating surface, which provides the cycle life and corrosion resistance needed for repeated field mating in D-subminiature connectors.

Crimp tooling and assembly note

For reliable crimp termination, use a tool designed for AMPLIMITE HDP-20 contacts in the 24-28 AWG range. The stamped pin geometry requires a four-indent or full-cycle crimp tool to achieve the specified wire pull-out force.

Frequently asked questions

Where can I buy 66507-9 and what is the price?

The 66507-9 is available to order against an RFQ through our independent distribution network. Pricing and current availability are confirmed at quote time based on your BOM quantity and delivery requirements.

What crimp tool is recommended for 66507-9?

Use a crimp tool designed for AMPLIMITE HDP-20 stamped contacts in the 24-28 AWG wire range. A full-cycle ratchet tool with a four-indent die profile is typical for this contact geometry to ensure consistent pull-force and electrical performance.