TE Connectivity Multimate III+ series stamped pin contact, 66564-8, 20-24 AWG, gold 30.0µin (0.76µm) plating, crimp termination, brass material.
| Parameter | Value |
|---|---|
| Type | Stamped |
| Series | Multimate III+ |
| Wire gauge | 20-24 AWG |
| Contact material | Brass |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Pin or socket | Pin |
| Contact finish | Gold |
| Contact termination | Crimp |
| Contact finish thickness | 30.0µin (0.76µm) |
The 20-24 AWG range covers the common signal and low-power wire sizes you'd expect in a Multimate III+ harness. The stamped construction keeps the contact consistent part-to-part, which matters when you're running a dozen of these in a single housing and every terminal has to seat cleanly.
The 66564-8 is sourced to order against an RFQ through independent distribution. Submit a request with your target quantity and we'll confirm availability and current pricing at quote time.
Yes, the 66564-8 is a Multimate III+ series stamped pin contact. It mates with the corresponding Multimate III+ socket contacts and fits into standard Multimate III+ housings that accept crimp pins on 20-24 AWG wire.
The 66564-8 accepts 20-24 AWG wire. Use the correct TE crimp tooling for that range to ensure proper retention and pull-force.
The contact finish is 30.0µin (0.76µm) gold over brass. That thickness supports repeated mating cycles in signal-level applications where corrosion resistance is required.