TE Connectivity AMPLIMITE HDP-20 series, 66569-2, Stamped Socket Contact, 18 AWG, Solder Cup, Gold 30.0µin (0.76µm) over Phosphor Bronze.
| Parameter | Value |
|---|---|
| Type | Stamped |
| Series | AMPLIMITE HDP-20 |
| Wire gauge | 18 AWG |
| Contact material | Phosphor Bronze |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Pin or socket | Socket |
| Contact finish | Gold |
| Contact termination | Solder Cup |
| Contact finish thickness | 30.0µin (0.76µm) |
It accepts 18 AWG wire and terminates via a solder cup — a hand-solder joint rather than a crimp barrel, which means the harness shop needs a soldering station, not a crimp tool.
Rated for 18 AWG wire, with solder cup termination.
The 66569-2 is rated for 18 AWG wire. It terminates via a solder cup, so the wire is soldered into the contact rather than crimped.
Yes, the 66569-2 is a stamped socket contact from the AMPLIMITE HDP-20 series and fits standard HDP-20 D-sub housings and inserts.
The contact is made of phosphor bronze with a gold finish. The gold plating thickness is 30.0µin (0.76µm) on the mating surface.