The Buchanan 6PCV-09-007 is a 9-circuit barrier strip from the #6 series, a workhorse terminal block family for panel and PCB power distribution. The 0.375" (9.53mm) pitch spaces the terminals wide enough to land 12-22 AWG wire comfortably under the screws — the 25A per circuit rating means this strip handles motor branch circuits, heater loads, and DC bus distribution inside a control cabinet, not just signal-level wiring. The three-wall (tri) barrier design physically separates adjacent terminals, so a stray screwdriver or a loose strand won't short across to the next circuit. Rated 300V, UL94 V-0 thermoplastic insulation, and a full 105°C operating ceiling — this is a strip built for industrial environments where a live panel gets opened hot.
What the 25A and 300V Ratings Actually Mean for Your Panel
25A per circuit is the continuous current at the rated temperature rise. On a 9-circuit strip that's 225A total across the block if every circuit is loaded, but the real limit is the aggregate temperature rise inside the enclosure.
Termination and Mounting — What Connects Where
Top termination is a standard screw clamp — strip the wire, insert under the clamp plate, torque to the manufacturer's spec. The single-row layout with 9 wire entries lines up directly with the 9 circuits; there's no shared terminal or common bus inside the strip. The three-wall barrier means each terminal pocket is fully enclosed on three sides — the open side faces the screw entry. Mating is wire-to-board: the wire lands on top, the PC pin goes to the board. No separate housing or plug is involved.
Sourcing — Real Stock, Not a Promise
Active lifecycle status, RoHS compliant. No stock-holding claim, no lead-time number — the supply posture is confirmed per request.