Skip to main content
Log in
TE Connectivity AMP Connectors 7-5530843-6 — Card-Edge Connectors

TE Standard Edge II 7-5530843-6, 12 Pos Edge Connector

MPN7-5530843-6
Active

TE Connectivity Standard Edge II, female edge connector, 12 positions, dual readout, 0.100" (2.54mm) pitch, through hole solder termination, gold 30.0µin contacts, black polyester housing.

$3.0500Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 7-5530843-6 datasheet (PDF)
RoHSRoHS Compliant
SeriesStandard Edge II
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

7-5530843-6 specifications
ParameterValue
SeriesStandard Edge II
Card typeNon Specified - Dual Edge
MountingThrough Hole
Operating temperature-55°C ~ 85°C
ColorBlack
Contact materialPhosphor Bronze
Material - insulationPolyester, Glass Filled
Pitch0.100\" (2.54mm)
GenderFemale
PackageBulk
Read outDual
TerminationSolder
Card thickness0.054\" ~ 0.070\" (1.37mm ~ 1.78mm)
Contact finishGold
Rows2
Positions12
Contact finish thickness30.0µin (0.76µm)

Product details

12-Position Dual-Read Edge Connector for 0.062" Cards

The card slot accepts PCB thicknesses from 0.054" to 0.070" (1.37mm to 1.78mm), which covers the common 0.062" nominal board.

Pitch and Card Thickness Tolerance

The 0.054"~0.070" card thickness window means this connector will accept a 0.062" nominal board with standard +/-10% tolerance, plus thinner 1.37mm or thicker 1.78mm boards if needed. The dual-readout design contacts both sides of the card edge, doubling the contact density per linear inch of slot length compared to a single-readout layout.

Frequently asked questions

What is the pitch of 7-5530843-6?

The pitch is 0.100" (2.54mm), which is the standard spacing for edge-card connectors matching most PCB edge finger layouts.

Can 7-5530843-6 be used with a 1.6mm PCB?

The specified card thickness range is 0.054" to 0.070" (1.37mm to 1.78mm). A 1.6mm (0.063") PCB falls within that range and is acceptable.