TE Connectivity AMPLIMITE HDE-20 D-Sub plug, 25 positions, 2 rows, IDC termination, 22-26 AWG, gold flash contacts, 250V, UL94 V-0, free hanging, black.
| Parameter | Value |
|---|---|
| Series | AMPLIMITE HDE-20 |
| Type | Signal |
| Mounting | Free Hanging (In-Line) |
| Connector type | Plug, Male Pins |
| Voltage rating | 250V |
| Current rating | Varies by Wire Gauge |
| Wire gauge | 22-26 AWG |
| Shell size, connector layout | 3 (DB, B) |
| Operating temperature | -55°C ~ 105°C |
| Color | Black |
| Contact material | Phosphor Bronze |
| Dielectric material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Package | Bulk |
| Termination | IDC, Discrete Wire |
| Contact finish | Gold |
| Flange feature | Housing/Shell (Unthreaded) |
| Rows | 2 |
| Positions | 25 |
| Contact finish thickness | Flash |
This connector terminates 22-26 AWG discrete wire directly through an IDC slot — no crimp tooling, no loose contacts to feed. That saves a station on the harness line if you already run IDC presses, but it also means the wire insulation diameter and strip length must match the slot geometry.
ROHS3 compliance is on record, so it passes the materials declaration gate for EU-market builds.
The 745211-7 is a D-Sub plug with male pins in a DB-25 shell layout. It mates with any standard DB-25 receptacle (female socket) of the same shell size and arrangement, such as the TE AMPLIMITE HDE-20 receptacle series.