Stamped Socket for AMPLIMITE HDP-20, 18-22 AWG
This is the socket half — it installs into the receptacle housing of a standard D-sub connector, mating with the pin contacts on the plug side.
Wire Range and Crimp Fit
Rated for 18-22 AWG stranded wire, this socket accepts the standard wire sizes used in D-sub harnesses for signal and low-power circuits. The crimp barrel is stamped phosphor bronze — the same base material as the mating contact, so galvanic corrosion at the crimp joint isn't a concern. No specific tool part number is listed in the spec, but any AMPLIMITE HDP-20-series crimp die set that matches the contact geometry will work; the standard TE hand crimper or pneumatic tool for this series is the usual choice on the line.