68-Position Terminating Cover for AMPLIMITE .050 III
The TE Connectivity 750877-7 is a 68-position terminating cover from the AMPLIMITE.050 III series, designed to fit over the rear of a mated connector pair to protect exposed solder tails or crimp terminations from shorting against the enclosure or adjacent wiring. It clips onto the connector shell after termination, providing strain relief and electrical insulation for the back of the connector assembly. This cover is intended for use with AMPLIMITE Series 0.050 III connectors, a high-density D-subminiature family with a 0.050-inch pitch that packs 68 signal contacts into a standard D-sub shell footprint.
The 750877-7 is designed specifically for the AMPLIMITE.050 III series, not for earlier AMPLIMITE generations or other D-sub families. It mates with the 68-position plug and receptacle shells in that series, covering the termination area after the contacts are installed. The position count is the primary fit parameter — a 68-position cover will not fit a 50-position or 100-position shell, even within the same series. If you are working with a different AMPLIMITE.050 III position count, look for the matching cover in the 750877 base product family.