Skip to main content
Log in
TE Connectivity AMP Connectors 84952-4 — FFC / FPC Cable Assemblies

84952-4 TE Connectivity FPC Connector, 4 Position

MPN84952-4
Active

TE Connectivity AMP Connectors 84952-4, FPC connector, 4 positions, 0.039" (1.00 mm) pitch, bottom contact, ZIF slide lock, SMT right-angle, 1 A, 200 V, -40°C to 85°C, UL94 V-0.

$0.5083Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 84952-4 datasheet (PDF)
RoHSROHS3 Compliant
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

84952-4 key specifications
ParameterValue
MountingSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating200V
Current rating1A
Operating temperature-40°C ~ 85°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA), Nylon, Glass Filled

All specifications

84952-4 additional specifications
ParameterValue
Height above board0.101\" (2.56mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions4
Contact finish thickness78.7µin (2.00µm)

Product details

1.00 mm pitch, 4 positions, bottom-contact ZIF

The 84952-4 is a 4-position FPC connector on a 0.039" (1.00 mm) pitch, with a bottom-contact configuration and a ZIF slide-lock actuator. The contact side matters: a flipped FPC shorts the wrong row — the flex must be inserted with the conductor pads facing down toward the PCB. The LCP housing carries UL94 V-0 flammability rating.

Right-angle SMT with solder retention

A thinner or thicker flex will not seat correctly, and the contact wipe depends on the correct flex thickness.

No official second-source or pin-compatible replacement is listed.

Frequently asked questions

Is the 84952-4 a ZIF connector?

Yes — the 84952-4 features a Zero Insertion Force (ZIF) slide-lock actuator. The flex cable is inserted without force, then the slide lock is engaged to clamp the contacts. The actuator material is glass-filled nylon (PA).

What is the mounting type of the 84952-4?

Surface mount, right-angle orientation. The connector mounts at the board edge with the flex cable running parallel to the PCB. Height above board is 0.101" (2.56 mm).

What is the pitch of the 84952-4?

0.039" (1.00 mm) pitch — the center-to-center spacing between adjacent contacts. This sets the board footprint and the routing density for the FPC traces.