TE Connectivity AMP Connectors 84952-5, FPC connector, 5 positions, 0.039" (1.00 mm) pitch, bottom contacts, ZIF slide lock, right-angle SMT, tin-plated phosphor bronze contacts, 1 A, 200 V, UL94 V-0.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 200V |
| Current rating | 1A |
| Operating temperature | -40°C ~ 85°C |
| Housing color | Natural |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Liquid Crystal Polymer (LCP), Glass Filled |
| Actuator material | Polyamide (PA), Nylon, Glass Filled |
| Parameter | Value |
|---|---|
| Height above board | 0.101\" (2.56mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Contact finish | Tin |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm |
| Positions | 5 |
| Contact finish thickness | 78.7µin (2.00µm) |
The 84952-5 is a 5-position, 1.00 mm pitch FPC connector from TE Connectivity's 84952 series.
The bottom-contact configuration mates with the FPC's conductive pads on the lower side. The slide lock actuator secures the FPC without requiring a secondary latch, simplifying assembly in automated lines.
Yes, the 84952-5 uses a zero insertion force (ZIF) design with a slide lock actuator. The FPC is inserted without force, and the slide lock secures it in place.
It is a surface-mount, right-angle connector with solder termination. The right-angle orientation keeps the FPC parallel to the PCB, suitable for board-edge routing.
No official pin-compatible alternative or cross-reference is recorded from TE Connectivity for the 84952-5. The base product number 84952 covers the series; other position counts share the same pitch and ZIF design but differ in circuit count.