TE Connectivity AMP Connectors 84952-6, FPC bottom-contact connector, 6 positions, 1.00 mm pitch, ZIF slide lock, right-angle SMT, tin-plated phosphor bronze contacts, rated 1 A per contact at 200 V.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 200V |
| Current rating | 1A |
| Operating temperature | -40°C ~ 85°C |
| Housing color | Natural |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Liquid Crystal Polymer (LCP), Glass Filled |
| Actuator material | Polyamide (PA), Nylon, Glass Filled |
| Parameter | Value |
|---|---|
| Height above board | 0.101\" (2.56mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Contact finish | Tin |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm |
| Positions | 6 |
| Contact finish thickness | 78.7µin (2.00µm) |
The housing uses a glass-filled LCP (UL94 V-0), which holds up to reflow temperatures without warping.
The contacts are on the bottom side — the FPC conductor pattern must face down toward the board. The slide lock opens to insert the cable, then slides closed to clamp the conductors against the contacts. Termination is solder-only — the SMT pads are reflow-soldered to the board.
Yes, it is ROHS3 compliant.