Panel wiring terminal block, 8 circuits at 0.375" pitch
The TE Connectivity Buchanan NC6-P107-08 is an 8-circuit barrier strip with a 0.375" (9.53mm) pitch, built for through-hole mounting on a PCB with screw-clamp terminations on top and PC pin tails underneath. It accepts 12-22 AWG wire and carries a 20 A per-circuit rating at 300 V, which puts it squarely in the power-distribution zone inside an industrial control cabinet or HVAC panel — not a signal-level block.
20 A per circuit with 12-22 AWG — the real capacity limit
At 12 AWG the terminal can take the full 20 A with acceptable temperature rise; step down to 22 AWG and the wire itself becomes the bottleneck before the block does. The steel screw with zinc clear chromate finish turns down onto the conductor without galling the threads, and the PC pin bottom termination solders into the board — no crimp tool needed on site. For a field repair, that means you can re-terminate with just a screwdriver and a soldering iron.