M8 A-Coded 4-Position Female Receptacle for Sealed Industrial Interconnects
The T4041017041-000: The threaded copper alloy shell with nickel finish and IP67 rating means this connector seals dust-tight and withstands temporary water immersion when mated — suited for sensor harnesses, actuator connections, and control panels where washdown or condensation is routine. Gold-plated mating contacts rated 3 A per circuit at 30 V, with the 3.00 µin (0.076 µm) gold thickness handling the moderate mating cycles typical of field-installed equipment.
IP67 Sealing and Threaded Fastening for Harsh Environments
The IP67 rating means dust-tight and waterproof when mated. The threaded coupling ring mates with the matching male cable connector.
A-Coding and Pinout — Keying Matters
The A-coded orientation (per IEC 61076-2-101) is the standard keyway for M8 sensor/actuator networks. An A-coded plug will not mate with a B-, D- or other-coded M8 receptacle — that keying prevents wiring mistakes in multi-connector panels. The 4-position layout follows the standard M8-4 pinout; confirm the circuit assignment against your harness drawing before committing the BOM line.
Panel Mount and Solder Termination
This receptacle mounts through a panel cutout (bulkhead-style) and terminates via solder cups — no crimp tooling needed. The through-hole solder tails suit point-to-point wiring or PCB integration where the connector is panel-mounted and hand-wired to the board. The bulkhead flange seats against the panel face; the threaded body accepts the mating plug from the cable side.