M12 A-Coded Field-Wireable Plug, 3-Position, IP67
The T4112001031-000 is an M12 A-coded plug with 3 female sockets, gold-plated contacts, and screw termination — a field-wireable connector for sensor and actuator harnesses in industrial environments. The 4 A per contact and 250 V rating cover the typical signal and low-power circuit range for M12 applications, while the IP67 seal keeps washdown and dust out when the coupling nut is hand-tightened against a mating receptacle. The right-angle free-hanging body and backshell with coupling nut let you route the cable tight to a panel edge or junction box without a straight plug's strain on the wire.
What the 4 A and 250 V Ratings Mean in Practice
4 A per contact is the continuous current limit at the rated temperature. The 250 V rating matches standard industrial control voltages.
IP67 Sealing and Threaded Coupling
The IP67 rating means the connector is dust-tight and survives temporary immersion — the O-ring seats at the mating face, not the thread, so hand-tightening the coupling nut is enough to seal it. The A-coded keying orientation ensures it only mates with an A-coded M12 receptacle, so you won't accidentally plug a sensor into a power circuit. The nickel-plated brass shell and the PBT backshell resist corrosion in damp cabinet or washdown environments.
Cable Range and Termination
The screw termination accepts cable diameters from 0.157" to 0.236" (4.00 mm to 6.00 mm). The backshell and coupling nut are included.