M12 Female Plug, 4-Pin, Screw Termination, IP67
The T4112002041-000: The connector is IP67-rated when mated, meaning it seals against dust ingress and temporary immersion — the O-ring seats at the coupling nut face, not the threads, so hand-tight is enough to hold the seal on a washdown line.
Cable Fit and Field Wiring
This plug accepts cable diameters from 0.236" to 0.315" (6.00 mm to 8.00 mm), which covers common sensor cables and 4-conductor round jackets. The screw termination lets you field-wire a spare without a crimp tool — strip, insert, tighten. The right-angle body and backshell with coupling nut give a low-profile exit that keeps the cable routed flat against the machine frame, reducing snag points on a moving line.
Operating Range and Materials
The shell is nickel-plated brass, the insert is polyamide (nylon), and the backshell is glass-filled PBT — all standard for M12 connectors that see coolant mist and occasional washdown. Unshielded, so it's for signal or low-voltage DC power runs where EMI is not a concern.