D-Coded M12 Male Receptacle for Sealed Industrial Links
It carries 4A per contact at 60V, with gold-plated mating surfaces (3.00µin) on copper alloy contacts. This is the panel-mount bulkhead side — the rear nut secures it from the inside of the enclosure, leaving the threaded face for the mating female cordset.
Sizing the Current and Sealing for the Application
The 60V rating covers most 24V DC industrial buses with margin. The IP67 seal means the mated pair withstands hose-down and temporary immersion; the D-coding prevents plugging into a non-D (A/B-coded) M12 port, which is the key field-replacement safeguard. Solder cup termination gives the harness builder flexibility on wire gauge and cable type, but adds assembly time versus a crimp variant.