TE Connectivity M12 B-coded receptacle, male pins, 2 positions, 4A, 250V, IP67, gold flash contacts, wire leads, panel mount, nickel shell.
| Parameter | Value |
|---|---|
| Series | M12 |
| Mounting | Panel Mount |
| Connector type | Receptacle, Male Pins |
| Fastening type | Threaded |
| Voltage rating | 250V |
| Current rating | 4A |
| IP rating | IP67 - Dust Tight, Waterproof |
| Mounting feature | Bulkhead - Front Side Nut |
| Operating temperature | -40°C ~ 85°C |
| Color | Silver |
| Shell material | Copper Alloy |
| Insert material | Polyamide (PA), Nylon |
| Parameter | Value |
|---|---|
| Contact material | Copper Alloy |
| Primary material | Metal |
| Material flammability rating | UL94 V-0 |
| Package | Bulk |
| Shielding | Shielded |
| Orientation | B |
| Termination | Wire Leads |
| Applications | Industrial |
| Shell finish | Nickel |
| Positions | 2 |
| Shell size - insert | M12-2 |
| Contact finish - mating | Gold |
| Contact finish thickness - mating | Flash |
The B-coded orientation keying prevents cross-mating with A-coded or D-coded M12 connectors, a deliberate design choice for PROFIBUS and other B-coded networks.
This receptacle mounts from the front of the panel using a bulkhead nut, with the wire leads exiting the rear. The termination is pre-moulded wire leads — no field crimping or soldering required.
Yes, as a standard M12-2 B-coded receptacle, it mates with any B-coded M12 male plug or cordset of the same shell size. The B-coded keying ensures it will not mate with A-coded or D-coded connectors.
IP67 — dust-tight and protected against temporary immersion in water. This rating is valid only when the connector is fully mated and the threaded coupling ring is properly torqued. An unmated receptacle has no ingress protection; cap the open half if it will be exposed.