Skip to main content
Amphenol 031-70539-12G

Amphenol RF 031-70539-12G BNC Jack, 75 Ohm, 12 GHz

MPN 031-70539-12G
Active

Amphenol RF 031-70539-12G BNC jack, female socket, 75 Ohm, 12 GHz, 500 mating cycles, crimp termination, nickel body, gold center contact, includes 4 pieces.

$11.0600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

031-70539-12G key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Frequency - max12 GHz
Cable groupBelden 1794A, 4794R
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialPhosphor Bronze
PackageBulk
Includes4 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Insulator

All specifications

031-70539-12G additional specifications
ParameterValue
Impedance75Ohm
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

75 Ohm BNC Crimp Jack for Belden 1794A / 4794R

The 031-70539-12G: This is the 75 Ohm variant of the standard 50 Ohm BNC — the impedance mismatch between a 50 Ohm plug and 75 Ohm cable will cause a reflection at the interface, so matching the connector impedance to the cable is non-negotiable. Rated to 12 GHz with 500 mating cycles, it covers high-frequency video, broadcast, and data applications where signal integrity matters.

75 Ohm vs 50 Ohm — The Impedance Match

The physical interface is identical — both use the same bayonet lock and center contact geometry — but the dielectric and center pin dimensions differ to achieve the target impedance. Using a 75 Ohm connector on a 50 Ohm cable (or vice versa) creates a mismatch that degrades return loss and signal amplitude, especially above a few hundred MHz. For Belden 1794A (75 Ohm) or 4794R (75 Ohm), this is the correct impedance.

Crimp Kit Contents and Installation

The kit ships with four pieces: the BNC jack body, one gold-plated center contact, one crimp ferrule, and one PTFE insulator. The center contact is crimped onto the cable center conductor, the ferrule is crimped over the braid and jacket, and the insulator positions the contact inside the body. The PTFE dielectric provides stable impedance and low loss up to 12 GHz. For Belden 1794A, the crimp die selection must match the cable diameter — the ferrule is sized for that cable group.

MPN
031-70539-12G