Skip to main content
Amphenol 034-5079

034-5079 BNC HD Plug, 50 Ohm, 6 GHz, LMR-195, Active

MPN 034-5079
Active

Amphenol 034-5079 BNC HD plug, 50 Ohm, 6 GHz, LMR-195 cable group, bayonet lock, crimp shield, solder centre contact, gold-plated phosphor bronze pin, nickel brass body.

$11.3100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

034-5079 specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeBayonet Lock
Frequency - max6 GHz
Cable groupLMR-195
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialPhosphor Bronze
PackageBag
Impedance50Ohm
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

RF Connector for LMR-195 Cable Runs

The 034-5079: The HD (heavy-duty) BNC interface retains the standard bayonet lock but uses a thicker body wall and a larger dielectric to handle the 0.195-inch cable diameter without signal degradation. Rated to 6 GHz, this connector covers the full L-band, most ISM bands, and common wireless backhaul frequencies before the VSWR climbs. The gold-plated phosphor bronze centre contact and nickel-plated brass body give it corrosion resistance for outdoor or industrial cabinet runs.

Cable Prep and Termination Sequence

This plug uses a crimp shield termination and a solder centre contact — a two-step assembly common on LMR-195.

Why 50 Ohm and 6 GHz Matter for This Cable

LMR-195 is a 50 Ohm cable with about 6.8 dB/100 ft loss at 1 GHz. The 034-5079 matches that impedance exactly, so there is no reflection at the connector-to-cable junction. The 6 GHz ceiling is the practical limit for this interface — above that, the BNC HD geometry starts to radiate. Compare this to the 034-1118-12G, which is a 75 Ohm BNC HD plug rated to 18 GHz for Belden 1855 A cable. If your system is 75 Ohm or needs the higher frequency headroom, that peer is the correct choice; for standard 50 Ohm LMR-195 runs, the 034-5079 is the direct fit.

MPN
034-5079