Skip to main content
Amphenol 68695-148HLF

Amphenol FCI 68695-148HLF BERGSTIK II Header, 48 Pos

MPN 68695-148HLF
Active

Amphenol FCI BERGSTIK® II 68695-148HLF, dual-row 48-position unshrouded header, 0.100" (2.54mm) pitch, 5 A per contact, 110 V, 30.0µin gold-plated phosphor bronze pins, right-angle through-hole, UL94 V-0.

$6.7800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

68695-148HLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

68695-148HLF additional specifications
ParameterValue
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions48
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.090\" (2.29mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol FCI 68695-148HLF is a 48-position, dual-row unshrouded header from the BERGSTIK® II series, designed for board-to-board interconnect on a standard 0.100" (2.54mm) pitch grid.

The 0.100" (2.54mm) pitch is the industry-standard grid — the footprint matches any 0.100" dual-row through-hole pattern, so board layout is straightforward with no special keep-out zones. The 48 positions loaded all give you the full circuit count, which is the primary BOM match criterion; if your design calls for fewer circuits, the unshrouded design lets you depopulate pins on the mating receptacle side, but the header itself is fully populated. For a board-to-board interconnect that may see field service or multiple reconnections, that gold thickness buys you reliable contact resistance over the life of the assembly. The 0.090" (2.29mm) post length is short, designed for standard PCB thickness; check your board stack-up if you're routing through a thick backplane.

MPN
68695-148HLF