Skip to main content
Molex 5031821852

Molex 5031821852 microSD Connector, 10-Pin, 1.45mm Height

MPN 5031821852
Active

Molex 503182 Series microSD Connector and Ejector, 5031821852, 10 (8 + 2) positions, Surface Mount Right Angle, Gold contacts, 1.45mm height above board, Push In/Push Out, with integrated Switch.

$4.0500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Series503182
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5031821852 specifications
ParameterValue
Series503182
Card typeSecure Digital - microSD™
MountingSurface Mount, Right Angle
Connector typeConnector and Ejector
Mounting featureNormal, Standard - Top
Height above board0.057\" (1.45mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSwitch
Contact finishGold
Positions10 (8 + 2)
Insertion, removal methodPush In, Push Out

Product details

The Molex 5031821852 is a surface-mount, right-angle microSD™ card connector from the 503182 series, integrating both the connector body and a card ejector into a single 10-position (8 + 2) package. The extra two positions are a dedicated card detect switch — a feature that lets the host controller sense when a card is fully seated, without needing a separate mechanical switch elsewhere on the board. It accepts standard microSD cards, with a push-in/push-out insertion and removal method, and sits just 1.45 mm above the PCB.

The Card Detect Switch — What It Does for the Design

The switch feature is the detail that separates this part from a plain microSD connector. When the card is pushed fully home, the switch contacts close, signaling to the processor that the card is present and ready. That saves a GPIO pin and a debounce circuit you'd otherwise need to add. For a field-service perspective: if a device intermittently loses the card, the first thing to check is whether the switch is making contact — a bent switch terminal on the SMT pad is a common failure point after rework. The gold contact finish on the signal pins helps here too: it handles the repeated insertion cycles of field use better than tin would, so the card detect signal stays reliable over thousands of mates.

Mounting and Board Layout Notes

Surface mount, right-angle orientation means the card inserts parallel to the PCB, not perpendicular — the card sits flat against the board, which keeps the overall z-height down to the 1.45 mm the connector itself occupies. The right-angle body also puts the card slot at the board edge, which is typical for an enclosure's SD card cutout. The Tape & Reel packaging is what you expect for an SMT part destined for a pick-and-place line; the Cut Tape option is there for prototyping or low-volume builds where you don't want to commit to a full reel. The base product number 503182 covers the series, so if you're searching for a different position count or height variant, that's the family root to look under.

MPN
5031821852