Skip to main content
TE Connectivity AMP Connectors 1-1478401-0

TE Greenpar BNC Plug 1-1478401-0, 50 Ohm, 4 GHz, RG-58

MPN 1-1478401-0
Active

TE Connectivity Greenpar BNC plug, male pin, 50 Ohm, 4 GHz, 500 V, solder contact, clamp shield, free-hanging, silver body, RG-58C/141A/Belden 9907.

$7.2900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1478401-0 key specifications
ParameterValue
SeriesGreenpar
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Cable groupRG-58C, 141A, Belden 9907
Operating temperature-55°C~85°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass

All specifications

1-1478401-0 additional specifications
ParameterValue
PackageBulk
Impedance50Ohm
Body finishSilver
Mating cycles500
Number of ports1
Shield terminationClamp
Contact terminationSolder
Center contact platingSilver

Product details

BNC plug for RG-58 and similar coax — what it fits and how it terminates

It's built for the cable group that includes RG-58C, 141A, and Belden 9907 — so if you're pulling from a reel of RG-58, this body matches that jacket diameter and dielectric. The contact termination is solder, and the shield is secured with a clamp, not a crimp ferrule. That means you tin the centre conductor, solder it into the brass pin, then clamp the braid under the shell. Frequency range runs to 4 GHz at 50 Ohm, with a voltage rating of 500 V. The body is brass with a silver finish, the centre contact is silver-plated brass, and the dielectric is PTFE — the usual RF-grade build.

Cable prep and assembly — what the clamp shield means on the bench

The shield termination is a clamp. Strip the cable per the manufacturer's specification for RG-58C or 141A, solder the centre pin, then slide the clamp over the braid and tighten the nut.

The base product number is 1478401, and the package is Bulk.

MPN
1-1478401-0