Skip to main content
TE Connectivity AMP Connectors 1-440129-1

TE 1-440129-1 HPI Receptacle Housing, 11 Pos, 2.00mm

MPN 1-440129-1
Active

TE Connectivity High Performance Interconnect (HPI) receptacle housing, 1-440129-1, 11 positions, 2.00mm pitch, single row, natural thermoplastic, free-hanging, crimp termination, contacts not included.

$0.2800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesHigh Performance Interconnect (HPI)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-440129-1 specifications
ParameterValue
SeriesHigh Performance Interconnect (HPI)
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialThermoplastic
NoteContacts Not Included
Pitch0.079\" (2.00mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions11

Product details

The TE Connectivity 1-440129-1 is an 11-position, single-row receptacle housing from the High Performance Interconnect (HPI) series. It uses a 2.00 mm pitch — tight enough for a compact wire-to-board harness but wide enough to keep the crimp terminals manageable with standard tooling. The housing is natural thermoplastic, free-hanging (in-line), and accepts female socket contacts that are crimped separately. This is the wire-side half of the connection; it mates with a matching pin header (same pitch, same series) to complete the circuit.

Critical Procurement Detail: Contacts Are Sold Separately

The housing ships empty — the note on the line is "Contacts Not Included." You need to order the matching crimp terminals (female socket contacts for the HPI series) as a separate line item. The 2.00 mm pitch and single-row layout mean the terminal part number will be specific to this wire gauge range; check the HPI application tooling guide for the correct crimp die.

Mating Header and Fit Check

This receptacle mates with a 2.00 mm pitch HPI pin header, also single-row, 11 positions. The header will be a through-hole or surface-mount variant depending on your board design. The free-hanging housing latches onto the header — the locking ramp (if present on the header side) keeps the pair together under vibration. Confirm the header part number from the same HPI series; the pitch and position count are the hard constraints.

Sourcing and Availability

For BOM planning, factor in the separate terminal order and the lead time for the full assembly.

MPN
1-440129-1