Skip to main content
TE Connectivity AMP Connectors 163082-2

TE Connectivity 163082-2 Multimate III+ Stamped Pin Contact

MPN 163082-2
Active

TE Connectivity Multimate III+ series, Stamped Pin Contact, 163082-2, 16-18 AWG, Gold 31.5µin, Crimp termination, Bulk.

$2.2900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

163082-2 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge16-18 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness31.5µin (0.80µm)

Product details

The contact carries a 31.5µin (0.80µm) gold plating on the mating surface — a thickness well above the 15µin flash typical of signal-grade contacts, which means it can handle repeated mating cycles in corrosive or high-vibration environments without fretting corrosion.

This contact mates with standard Multimate III+ receptacle housings — the same family used across AMP CPC, D-Sub, and other industrial connector systems. The stamped pin geometry ensures positive retention in the housing cavity when fully seated. No special adapter or conversion is needed; it drops directly into any Multimate III+ cavity designed for stamped pin contacts.

Crimp Tooling and Termination

Crimping 16-18 AWG wire to this contact requires a tool that matches the stamped contact profile and wire range. TE Connectivity recommends a manual or pneumatic crimp tool with the proper die set for Multimate III+ stamped contacts — the same tooling used for other contacts in the series. The crimp must produce a symmetrical barrel fold that meets the pull-out force spec for the wire gauge; a field technician can verify with a go/no-go gauge.

MPN
163082-2