Skip to main content
TE Connectivity AMP Connectors 5-2301996-4

TE Connectivity 5-2301996-4 RJ45 Jack, 2-Port, 1000 Base-T

MPN 5-2301996-4
Active

TE Connectivity RJ45 jack, 2-port, 8 cores per jack, 90° right-angle, through-hole, shielded with EMI finger, gold 30.0µin contact finish, board lock, -40°C to 85°C, tray.

$17.3900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5-2301996-4 key specifications
ParameterValue
MountingThrough Hole
Connector typeRJ45
Operating temperature-40°C ~ 85°C
LED colorDoes Not Contain LED
Shield materialBrass
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP)
Height above board0.531\" (13.49mm)
PackageTray
FeaturesBoard Lock
ShieldingShielded, EMI Finger
Orientation90° Angle (Right)

All specifications

5-2301996-4 additional specifications
ParameterValue
TerminationSolder
Applications10/100/1000 Base-T, AutoMDIX
Tab directionDown
Contact finishGold
Rows1
Number of ports2
Contact finish thickness30.0µin (0.76µm)
Number of cores per jack8

Product details

2-Port Shielded RJ45 for Gigabit Ethernet

The TE Connectivity 5-2301996-4 is a 2-port RJ45 jack rated for 10/100/1000 Base-T with AutoMDIX support — meaning it handles Gigabit Ethernet traffic and auto-corrects for straight-through vs crossover cables at the physical layer. Each of the two ports carries 8 cores, standard for 8P8C Ethernet jacks.

Shielding and Board Retention

This jack is shielded with an EMI finger and a brass shield body. The EMI finger contacts the panel cutout or chassis ground before the signal pins engage — that bleed path keeps common-mode noise off the Ethernet transformer side. For a design chasing FCC Class B or EN 55022, that grounded shield is the difference between passing and a re-spin. The board lock feature (two through-hole retention posts) anchors the jack during wave solder and resists the lever force from a stiff Cat6 cable pulling sideways at the faceplate.

Through-hole solder termination, right-angle orientation with tab facing down. The 0.531" (13.49 mm) height above board is the z-space the jack occupies above the PCB — check that clearance against the enclosure lid or card-guide above the board. The tab-down orientation means the latch release is on the bottom side, typical for horizontal PCB mounting where the cable exits downward.

MPN
5-2301996-4