Skip to main content
TE Connectivity AMP Connectors 66601-2

TE Connectivity 66601-2 Multimate III+ Stamped Socket

MPN 66601-2
Active

TE Connectivity Multimate III+ stamped socket contact, 66601-2, 14-18 AWG, gold 30.0µin (0.76µm) plating, crimp termination, bulk packaging.

$1.1500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

66601-2 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge14-18 AWG
Contact materialBrass
PackageBulk
Pin or socketSocket
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

What the gold plating thickness means for your application

At 30.0µin (0.76µm), the gold plating on the 66601-2 is three to six times thicker than the flash gold (5-10 µ") found on economy contacts. That thickness directly translates to mating cycle endurance — expect several hundred mate-unmate cycles before the gold wears through to the brass substrate, which matters for a contact that will be disconnected during equipment servicing. The gold layer also blocks oxide formation in humid or mildly corrosive environments, so the contact resistance stays stable over years of service in an unsealed housing.

Crimp tooling and field repair

Because the 66601-2 is a crimp contact, you can re-pin a damaged harness on site with the correct tool — no soldering iron needed. TE recommends their CERTI-CRIMP hand tool (such as 58433-3) with the appropriate die for 14-18 AWG wire. The stamped contact body has a defined crimp barrel that produces a gas-tight connection when the tool is properly adjusted. For a technician in the field, that means a failed pin in a Multimate III+ connector is a ten-minute fix, not a full harness replacement.

MPN
66601-2