Skip to main content
TE Connectivity AMP Connectors 120954-1

TE Connectivity 120954-1 UPM Header, 4 Pos, Press-Fit, 250V

MPN 120954-1
Active

TE Connectivity UPM (Universal Power Modules) series, Header Male Blades, 4 positions, 1 row, Press-Fit termination, Board Edge Through Hole Right Angle mounting, 250V, UL94 V-0, Gray.

$10.7900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesUPM (Universal Power Modules)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

120954-1 specifications
ParameterValue
SeriesUPM (Universal Power Modules)
MountingBoard Edge, Through Hole, Right Angle
Connector typeHeader, Male Blades
Voltage rating250V
Connector usageBackplane
Operating temperature-55°C ~ 125°C
ColorGray
Material flammability ratingUL94 V-0
PackageTube
FeaturesBoard Guide
TerminationPress-Fit
Contact finishGold or Gold-Palladium
Rows1
Positions4
Contact layout, typical4 Power

Product details

Backplane Blade Power Header, Press-Fit, 4 Positions

The TE Connectivity 120954-1 is a 4-position blade power header from the UPM (Universal Power Modules) series, designed for backplane power distribution. It uses press-fit termination — no solder required — which makes it suitable for high-reliability, solderless backplane assemblies where rework and field replacement are factors. The single-row, right-angle orientation places the blade contacts parallel to the PCB, routing power directly into the backplane from a daughtercard edge. Rated for 250V and a wide operating temperature range of -55°C to 125°C, this header is built for industrial and telecom environments where thermal cycling is a given. The housing carries a UL94 V-0 flammability rating, meeting the flame-retardant requirement for equipment installed inside an enclosure. Contact finish is gold or gold-palladium — gold on the mating interface supports repeated mating cycles in a backplane context where boards are swapped during service. A board guide feature on the housing helps align the header during blind-mating into a backplane midplane, reducing the risk of bent blades. The connector is gray in color and ships in tube packaging.

Press-Fit Assembly and Backplane Fit

Press-fit termination means the compliant pin is pressed into a plated through-hole on the backplane — no wave solder, no flux residue, and the joint is rework-friendly if a pin needs replacement. The right-angle orientation places the header at the board edge, so the mating receptacle (a UPM blade receptacle, not included) approaches from the opposite side of the backplane. The board guide feature on the housing provides mechanical alignment during mating, which is critical in a multi-slot backplane where several headers engage simultaneously.

MPN
120954-1