Skip to main content
TE Connectivity AMP Connectors 2-2170708-6

TE Connectivity 2-2170708-6 ZQSFP+ Cage

MPN 2-2170708-6
Active

TE Connectivity ZQSFP+ cage, ganged 1x6 with heat sink, press-fit termination, right-angle through-hole, EMI shielded with light pipe, tray.

$75.8450 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-2170708-6 specifications
ParameterValue
MountingThrough Hole, Right Angle
Connector typeCage, Ganged (1 x 6) with Heat Sink
PackageTray
FeaturesEMI Shielded, Light Pipe
TerminationPress-Fit

Product details

What This Cage Does in the Assembly

It accepts up to six QSFP+ or QSFP28 modules side-by-side, providing the mechanical retention, thermal management, and EMI containment those modules need at the board edge.

Integrated Features: Light Pipe and EMI Shielding

This cage carries an integrated light pipe and EMI shielding. The light pipe routes the module's link-status LED to the faceplate so an operator sees port activity without needing a separate board-mounted LED. The EMI shielding is essential at the data rates QSFP+ (40 Gbps) and QSFP28 (100 Gbps) modules run — the cage acts as a Faraday enclosure around each module port, keeping radiated emissions inside the chassis and external noise out of the high-speed signal lanes.

The press-fit termination uses compliant pins that cold-form into the plated through-hole barrel, creating a gas-tight joint without solder. For the board layout engineer, this means the PCB footprint must match the press-fit tail diameter and the recommended hole size — the datasheet's keep-out zone around each hole is non-negotiable because the insertion force during press-fit can damage traces or vias placed too close. The right-angle through-hole mounting also defines the cage's standoff height from the board, which sets the module's insertion plane relative to the PCB surface.

MPN
2-2170708-6