Skip to main content
TE Connectivity AMP Connectors 2057741-1

TE Impact 2057741-1 Header, 96 Pos, 0.075" Pitch, Press-Fit

MPN 2057741-1
Active

TE Connectivity Impact series header, 2057741-1, 96 positions, 6 rows, 0.075" (1.91mm) pitch, press-fit termination, gold 30.0µin plating, 0.75A, 30VAC/DC, UL94 V-0.

$13.5200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesImpact
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2057741-1 specifications
ParameterValue
SeriesImpact
MountingThrough Hole
Connector typeImpact, Guide Right
Voltage rating30VAC/DC
Current rating0.75A
Operating temperature-55°C ~ 85°C
ColorBlack
Material flammability ratingUL94 V-0
Pitch0.075\" (1.91mm)
PackageTube
TerminationPress-Fit
Contact finishGold
Rows6
Number of columns16
Positions96
Contact finish thickness30.0µin (0.76µm)

Product details

Impact 2057741-1 — 96-Position, 6-Row Header for High-Density Backplanes

The TE Connectivity 2057741-1 is a 96-position header from the Impact series, configured as a 6-row by 16-column grid on a 0.075" (1.91mm) pitch. This is the Guide Right variant, meaning the connector body includes alignment features that key the mating receptacle during blind-mate backplane assembly. The press-fit termination eliminates the thermal stress of wave soldering and allows field replacement of individual connectors from the backplane. Rated for signal-level duty at 0.75 A per contact and 30 VAC/DC, this header is designed for differential-pair routing in high-speed telecom and data-communications equipment.

The press-fit termination means the 2057741-1 is specified for a solderless backplane assembly. The compliant pin is designed to be pressed into a plated through-hole, creating a gas-tight interference fit. The through-hole mounting type confirms the PCB requires drilled and plated holes — not an SMT land pattern. The 6-row × 16-column footprint will dictate the backplane's layer count and routing channel density; the 0.075" pitch leaves room for two traces between holes on a typical inner layer, but the stack-up should be designed with the press-fit hole diameter and antipad clearance in mind.

Contact Plating and Signal Integrity

The gold thickness is sufficient to prevent oxidation of the base metal at the mating interface, which matters for signal integrity at low-level logic voltages — the 30 VAC/DC rating confirms this is a signal path, not a power rail.

MPN
2057741-1