Skip to main content
TE Connectivity AMP Connectors 2170328-1

TE Connectivity 2170328-1 Z-PACK HM-Zd Header, 60 Pos

MPN 2170328-1
Active

TE Connectivity Z-PACK HM-Zd high-speed header, male pins, 60 positions, 4 rows, 0.098" (2.50mm) pitch, press-fit termination, UL94 V-0, 0.700A per contact.

$10.8300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesZ-PACK HM-Zd
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2170328-1 specifications
ParameterValue
SeriesZ-PACK HM-Zd
MountingThrough Hole
Connector typeHeader, Male Pins
Voltage rating250V
Current rating0.700A
Operating temperature-65°C ~ 105°C
Material flammability ratingUL94 V-0
Pitch0.098\" (2.50mm)
PackageBulk
TerminationPress-Fit
Rows4
Number of columns10
Positions60

Product details

The 2170328-1: It arranges 60 contacts across 4 rows and 10 columns at a 0.098" (2.50mm) pitch — the column pitch typical for HM-Zd routing, giving the board layout engineer a known footprint for impedance-controlled traces. This is a signal-rate connector, rated 0.700A per contact, so it carries data lines, not bus power. The press-fit termination means it installs without solder — a clean backplane assembly where rework is possible and thermal stress on the plated through-holes is avoided.

What the 0.700A Rating Means for the Signal Path

0.700A per contact is a signal-level current, not a power rating. The Z-PACK HM-Zd series is built for high-speed differential signaling — think 10 Gb/s+ backplane lanes — where the contact geometry and impedance control matter more than current capacity. The 0.700A figure tells you this header is for data lines, not a DC rail.

Press-Fit Termination and Backplane Assembly

Press-fit is the termination method here — the compliant pin compresses into the plated through-hole of the backplane, making a gas-tight connection without solder. That matters for high-reliability builds: no solder voids, no thermal shock to the board, and the connector can be replaced in the field with the right insertion tool. The through-hole mounting gives mechanical stability on a thick backplane panel.

MPN
2170328-1