Skip to main content
TE Connectivity AMP Connectors 3-641438-9

TE MTA-156 3-641438-9 IDC Plug, 9 Pos, 0.156" Pitch

MPN 3-641438-9
Active

TE Connectivity MTA-156 IDC plug, 3-641438-9, 9 positions, 1 row, 0.156" (3.96mm) pitch, tin-plated male pins, 24 AWG, closed end, free-hanging right-angle mount.

$1.6800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesMTA-156
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

3-641438-9 specifications
ParameterValue
SeriesMTA-156
Wire typeDiscrete or Ribbon Cable
TypeMale Pin
MountingFree Hanging (In-Line), Right Angle
Connector typePlug
Wire gauge24 AWG
Cable terminationIDC
ColorWhite
Pitch0.156\" (3.96mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions9
Contact finish thickness80.0µin (2.03µm)

Product details

What This Plug Does on the Harness

The TE Connectivity MTA-156 3-641438-9 is a 9-position IDC plug that mass-terminates 24 AWG discrete or ribbon cable in one press operation — no individual crimp terminals, no loose contacts to feed. The 0.156" (3.96mm) pitch matches the standard MTA-156 header footprint, so the board layout is fixed once you pick this series. Tin plating on the male pins (80.0µin thick) handles a few mating cycles in a permanent harness install; it's not a high-cycle gold contact, but for a set-and-forget wire-to-board connection the tin saves cost over the gold-plated siblings. The closed-end housing stops the wire from poking out the back, keeping the harness profile clean and avoiding a short against a metal panel or enclosure wall.

IDC Termination — One Press, No Loose Parts

This plug uses insulation-displacement contacts: the wire sits in the slot, and the press tool forces the insulation aside so the tin-plated male pin bites into the conductor. No stripping, no crimping, no loose terminal inventory — the whole 9-position cable end terminates in one stroke. The wire gauge is locked to 24 AWG; the IDC slot geometry won't grip 22 AWG reliably, and 26 AWG may pull out under tension. Discrete or ribbon cable both work, but ribbon needs a slit at the breakout if you're daisy-chaining. The closed-end feature means the wire stops inside the housing — no tail to trim, no risk of a stray strand touching the header pins on the back side.

Mating and Mounting — Free-Hanging Right-Angle

The tin-on-tin contact interface is fine for a few mate-unmate cycles during assembly or field service; beyond that, the tin frets and contact resistance drifts. For a harness that stays mated for the life of the equipment, this is the right call. The white housing colour is the standard MTA-156 natural; no keying or colour coding on this variant.

MPN
3-641438-9