Plasti-Grip spade terminal for 16-22 AWG
The 324169 is a flanged spade terminal in TE's Plasti-Grip series, accepting 16-22 AWG wire and fitting an #8 stud. The tin-plated copper contact carries the crimp termination, and the PVC insulation sleeve is red for circuit identification. The serrated inner barrel grips the conductor strands during crimp, and the insulation support barrel closes over the jacket — the 0.105" to 0.140" insulation diameter range covers the common PVC and cross-linked wire constructions in this gauge.
Stud fit and wire range
The tongue inside opening measures 0.171" (4.34 mm) for the #8 stud, with the ring center to termination at 0.250" (6.35 mm). Overall length is 0.873" (22.17 mm) and the outer edge width is 0.416" (10.57 mm) — these dimensions determine clearance on the terminal block or bus bar.
