Skip to main content
TE Connectivity AMP Connectors 350491-1

350491-1 TE Connectivity PCB Single Post Pin, 0.093" Dia

MPN 350491-1
Active

TE Connectivity AMP 350491-1, PCB single post pin, flanged, non-insulated, 0.093" (2.36 mm) pin diameter, 0.245" above flange, tin-plated phosphor bronze, clinch fit for 0.062" boards, bulk.

$0.3900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSNot applicable
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

350491-1 specifications
ParameterValue
MountingThrough Hole
Terminal typeSingle Post
Mounting hole diameter0.067\" ~ 0.073\" (1.70mm ~ 1.85mm)
Terminal styleFlanged
Contact materialPhosphor Bronze
PackageBulk
InsulationNon-Insulated
TerminationClinch Fit
Contact finishTin
Board thickness0.062\" (1.57mm)
Flange diameter0.115\" (2.92mm)
Length - overall0.405\" (10.29mm)
Length - above flange0.245\" (6.22mm)
Pin size - above flange0.093\" (2.36mm) Dia

Product details

Pin Dimensions for Board Fit

The 350491-1: Overall length is 0.405" (10.29 mm), with 0.245" (6.22 mm) standing above the flange — that's the post height available for a mating receptacle or wire wrap. The pin diameter above the flange is 0.093" (2.36 mm), and the flange itself measures 0.115" (2.92 mm) across. Designed for a 0.062" (1.57 mm) thick board. The mounting hole diameter should fall between 0.067" and 0.073" (1.70 mm to 1.85 mm) — the clinch-fit legs expand into that range for a press-in hold before soldering.

Terminal Construction and Finish

Single-post terminal with a flanged base — the flange seats against the board surface and prevents the post from pushing through during clinching or soldering. Termination is clinch fit, meaning the post is pressed into the plated through-hole and the barrel is swaged on the opposite side. Contact material is phosphor bronze, a spring-grade alloy that resists fatigue under repeated insertion and extraction. The contact finish is tin — good for solderability and cost-effective for moderate-cycling applications where gold isn't required.

MPN
350491-1