Skip to main content
TE Connectivity AMP Connectors 5050871-5

5050871-5 TE Connectivity PCB Pin Socket, Closed Bottom

MPN 5050871-5
Active

TE Connectivity AMP Series 5 PCB pin socket, closed bottom, accepts 0.042"-0.049" pin diameter, gold 30µin over beryllium copper, solder termination, no tail, bulk pack.

$0.9200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Series5
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5050871-5 specifications
ParameterValue
Series5
Tail typeNo Tail
Mounting hole diameter0.101\" ~ 0.103\" (2.57mm ~ 2.62mm)
Operating temperature-65°C ~ 126°C
Socket depth0.275\" (6.99mm)
Contact materialBeryllium Copper
PackageBulk
FeaturesClosed Bottom
TerminationSolder
Contact finishGold
Flange diameter0.118\" (3.00mm)
Length - overall0.288\" (7.32mm)
Accepts pin diameter0.042\" ~ 0.049\" (1.07mm ~ 1.24mm)
Contact finish thickness30.0µin (0.76µm)

Product details

Pin socket for component leads and test points

This TE Connectivity AMP Series 5 pin socket (5050871-5) is a closed-bottom receptacle designed to accept round pins from 0.042" to 0.049" diameter. The closed bottom prevents solder from wicking into the socket during wave or hand soldering, which keeps the contact beam clean and the pin insertion force consistent. With a socket depth of 0.275" and overall length of 0.288", the pin seats fully without bottoming out on the board surface.

Comparing gold vs tin finish options

Gold gives lower and more stable contact resistance over many cycles — important if the socket sees frequent pin insertions in a field-service or test application. Tin is cheaper but wears faster and can oxidize in high-humidity environments. For a one-time solder-in application, tin is adequate; for repeated mating, the gold version is the right call. The closed-bottom feature on 5050871-5 and 5050871-8 keeps solder out; the open-bottom siblings (5050871-1 and 5050871-6) allow flux residue or solder to enter the socket cavity, which can interfere with pin insertion in dense boards.

MPN
5050871-5