Skip to main content
TE Connectivity AMP Connectors 5747837-4

TE Connectivity 5747837-4 D-Sub Receptacle, 15 Pos, 6A

MPN 5747837-4
Active

TE Connectivity AMPLIMITE HD-20 D-Sub receptacle, 5747837-4, 15 positions, 2 rows, right-angle through-hole solder, 6A, 125V, 30.0µin gold contacts, board lock and ground strap.

$7.1300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE HD-20
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5747837-4 key specifications
ParameterValue
SeriesAMPLIMITE HD-20
TypeSignal
MountingThrough Hole, Right Angle
Connector typeReceptacle, Female Sockets
Voltage rating125V
Current rating6A
Shell size, connector layout2 (DA, A)
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialPhosphor Bronze
Dielectric materialThermoplastic
Shell material, finishSteel, Tin Plated

All specifications

5747837-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageTube
FeaturesBoard Lock, Ground Strap
TerminationSolder
Contact finishGold
Flange featureHousing/Shell (4-40)
Rows2
Backset spacing0.590\" (14.99mm)
Positions15
Contact finish thickness30.0µin (0.76µm)

Product details

15-Position D-Sub Receptacle with Board Lock and Ground Strap

The TE Connectivity AMPLIMITE HD-20 5747837-4 is a 15-position D-Sub receptacle with female sockets, laid out in the standard DA-15 shell size (2 rows, shell layout 2 (DA, A)). It's a right-angle through-hole solder part, so it mounts parallel to the board edge — a common choice for panel-mount I/O where you need the connector face accessible from the enclosure wall. The housing is a UL94 V-0 thermoplastic, the shell is steel with tin plating, and the flange uses standard 4-40 threaded inserts for the mating hardware. Rated 125V, which is the standard voltage ceiling for this connector class.

What Crosses into the Harness You've Got

This is a standard DA-15 D-Sub receptacle. It mates with any standard DA-15 D-Sub plug (male pin) that uses the 4-40 threaded hardware. The backset spacing is 0.590" (14.99mm), which is the standard dimension for this shell size — no oddball offset that would foul your panel cutout. If you're re-pinning an existing harness, the crimp contacts are available separately; the receptacle itself is solder-terminated, so you'd need to solder wires or a ribbon cable directly to the solder cups.

MPN
5747837-4