What the 92634-112HLF Is
The Amphenol FCI 92634-112HLF is the 12-circuit member of the BERGSTIK II series — a dual-row, 0.100-inch (2.54 mm) pitch unshrouded header intended for board-to-board stacking in industrial and consumer applications. It mates as a right-angle through-hole pin header, accepting square male contacts on 0.100-inch row spacing and 0.100-inch between adjacent pins. The push-pull fastening type keeps the header seated against vibration without a separate locking feature — a useful trait in fixed-layout board stacks where the mating half stays in place once assembled. All 12 positions are loaded, so every circuit is populated on the pin header.
Ratings That Drive the Fit Decision
Rated 5 A per contact at the stated 110 V, the 92634-112HLF covers low-level power and signal paths in the same dual-row footprint. The contact finish — 30.0 µin (0.76 µm) gold or Gold GXT on the mating face — gives the cycle life and contact stability appropriate for production mating rather than field-reconnect duty. The phosphor bronze contact base supports that 5 A rating through the header body; the black insulator carries a UL94 V-0 flammability rating, which satisfies most industrial equipment flammability requirements without needing a secondary flame barrier.
Termination and Mating
Right-angle through-hole solder termination at 0.318-inch (8.08 mm) post length — the post is long enough to protrude through a standard PCB thickness and accept hand or wave-solder assembly. The 0.190-inch (4.83 mm) insulation height defines the stack-profiling dimension on the mating board face.