Amphenol ICC (FCI) Minitek® 0.80mm header, 10 positions, 0.80mm pitch, SMT right-angle, shrouded 4-wall, tin-plated contacts, 1 A, 30 VAC, glow wire compliant, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | Minitek® 0.80mm |
| Gender | Male Pin |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 30VAC |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Cream |
| Insulation height | 0.069\" (1.75mm) |
| Insulation material | Liquid Crystal Polymer (LCP), Halogen Free |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Glow Wire Compliant, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.031\" (0.80mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The 10144041-10011LF: The 1 A ceiling keeps the temperature rise within the LCP housing material limit, even in a 10-position fully loaded row.
For higher cycle counts or corrosive atmospheres, a gold-plated variant would be needed — none is listed in this series. In vibration-prone equipment, a secondary retention method (like a wire-to-board latch on the receptacle side) should be considered.
CT is available for prototype or low-volume builds.
The header mates with a Minitek® 0.80mm receptacle housing and crimp terminals (same series). The exact mating part number depends on circuit count and wire gauge — use the base product number 10144041 to find the matching receptacle in the series.