Skip to main content
Log in
10146997-06200LF — Amphenol product photo
Amphenol

10146997-06200LF Amphenol Minitek Pwr 5.7 Header, 6 Pos

MPN10146997-06200LF
Active

Amphenol ICC (FCI) Minitek® Pwr 5.7 header, 10146997-06200LF, 6 positions, 2 rows, 5.70 mm pitch, right-angle through hole, shrouded 4-wall, locking ramp, tin contacts, UL94 V-0, -40°C to 105°C, 600 VAC/DC.

$2.2200Ref. price · indicative, final on quote
10146997-06200LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

10146997-06200LF Technical Specifications
ParameterValue
SeriesMinitek® Pwr 5.7
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating600VAC/DC
Operating temperature-40°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.572\" (14.53mm)
Insulation materialLiquid Crystal Polymer (LCP), Halogen Free
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesBoard Guide, Glow Wire Compliant
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsGeneral Purpose, Medical, Military, Telecommunications
Contact shapeSquare
Rows2
Pitch0.224\" (5.70mm)
Positions6
Row spacing - mating0.224\" (5.70mm)
Contact finish - postTin
Contact length - post0.142\" (3.60mm)
Contact finish - matingTin
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

6-Position, 5.70 mm Pitch, Right-Angle Through Hole

The 10146997-06200LF: The 5.70 mm pitch and 5.70 mm row spacing provide a generous footprint for routing higher-current traces on the PCB.

Tin Plating, 100 µinch, for Moderate-Duty Interconnects

The thick tin layer resists fretting corrosion better than thin flash tin, extending contact reliability in applications with thermal cycling or vibration.

The header is rated for 600 VAC/DC, covering most industrial power distribution and telecom bus voltages without derating. Glow wire compliance and a board guide are included as standard features.

Comparing 6-Position vs 8-Position and 4-Position Siblings

The 10146997-06200LF (6 positions) sits between the 4-position (10146997-04200LF) and 8-position (10146997-08200LF) variants in the same series. For a BOM requiring exactly 6 circuits, this is the direct fit. The 8-position sibling offers two extra circuits on the same footprint length, useful if future expansion is planned. The 4-position is a smaller alternative for lower channel counts.

Frequently asked questions

What is the mating connector for 10146997-06200LF?

The 10146997-06200LF is a male pin header that mates with a Minitek® Pwr 5.7 receptacle housing (female, with crimp terminals). Confirm the receptacle order code with your harness supplier.

Are there equivalents or cross references for 10146997-06200LF?

The closest functional alternative within the same series is the 8-position sibling (10146997-08200LF) if extra circuits are acceptable, or the 4-position (10146997-04200LF) for fewer circuits. These share the same pitch, mounting, and plating.