Hybrid Power-and-Signal Receptacle Housing for Dense Harnesses
The Amphenol FCI 10162695-107060LF is a 13-position receptacle housing from the ComboLock series, arranged as 7 signal contacts plus 6 power contacts in a dual-row layout on 1.00mm pitch. The hybrid position count lets one connector carry both a low-current signal bundle and a separate power feed, reducing the number of harness breakouts.
Sizing the Harness — Position Count and Terminal Selection
The 13-position count is split into two distinct contact groups: 7 signal positions and 6 power positions. This is not a uniform 13-circuit layout — the signal and power cavities may accept different crimp terminals, so the harness builder needs to confirm the terminal part numbers for each group before crimping. The 1.00mm pitch keeps the housing narrow enough for dense wire routing, but the fine pitch also means the mating plug and terminals must match the same 1.00mm centerline spacing. The free-hanging (in-line) mounting suits this for wire-to-wire or wire-to-board harness sections where the receptacle floats in the harness rather than being panel-mounted.
Comparing to the 7-Position Sibling
The 10162695-105020LF is the 7-position (5 + 2 power) member of the same ComboLock series, sharing the same 1.00mm pitch, dual-row layout, locking ramp, and natural thermoplastic housing. The 10162695-107060LF carries 13 positions (7 + 6 power) — six more signal positions and four more power positions than the 7-position sibling.