Skip to main content
Amphenol 112335

Amphenol RF 112335 BNC Plug, 75 Ohm, RG-59, 4 GHz

MPN 112335
Active

Amphenol RF BNC plug, male pin, 75 Ohm, 4 GHz, 500 V, weatherproof, RG-59 cable group, solder termination, bayonet lock, 9-piece kit.

$3.8700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

112335 key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
IP ratingWeatherproof
Cable groupRG-59, 59B, 62, 140, 210, Belden 8241, 8263, 8279, 9209
Body materialBrass
Housing colorSilver
Dielectric materialPolyoxymethylene (POM) Acetal
Center contact materialBrass
Includes9 pcs - 1 Connector, 1 Contact, 1 Clamp, 1 Gasket, 2 Insulators, 1 Nut, 1 Ring, 1 Washer

All specifications

112335 additional specifications
ParameterValue
Impedance75 Ohms
PackageBag
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationClamp
Contact terminationSolder
Center contact platingGold

Product details

The 112335: Rated to 4 GHz and 500 V, with a weatherproof seal that keeps moisture out of the connection in outdoor or damp enclosure runs.

What's in the Kit — Field-Termination Ready

This is a 9-piece field-install kit: the connector body, a centre contact, a clamp, a gasket, two insulators, a nut, a ring, and a washer. That's everything needed to terminate a cable on-site — no separate hardware order. The clamp-style shield termination and solder centre contact are standard for BNC field terminations; the gasket and insulators are what give it the weatherproof seal. Compare that to the 112133, which ships as a 4-piece kit (connector, contact, ferrule, sleeve) with no gasket or insulators — that one is a crimp termination for indoor RG-179 runs, not a weatherproof field kit.

Cable Compatibility — RG-59 and Beyond

The cable group covers RG-59, 59B, 62, 140, 210, plus Belden 8241, 8263, 8279, and 9209. RG-59 is the most common — it's the 75 Ohm coax used for analog video, CCTV, and older cable TV drops. If you're terminating a surveillance camera cable or a composite video run, this is the plug. The clamp shield termination grips the braid firmly; the solder centre pin makes a gas-tight connection to the centre conductor.

Mating Cycles and Field Duty

Rated for 500 mating cycles — that's a solid number for a BNC that might get disconnected and reconnected a few times during camera installation or maintenance. The weatherproof rating means the connection stays sealed when mated, so no water ingress into the cable end.

MPN
112335