Skip to main content
Amphenol 112581

Amphenol RF 112581 BNC Jack Kit, 50 Ohm, 4 GHz, RG-402

MPN 112581
Active

Amphenol RF BNC jack, female socket, 50 Ohm, 4 GHz max, panel mount bulkhead, solder termination, for RG-402 semi-rigid cable, includes mounting hardware kit.

$8.6700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

112581 key specifications
ParameterValue
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Cable groupRG-402 (.141\" Semi Rigid)
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialPhosphor Bronze
Includes6 pcs - 1 Connector, 1 Contact, 1 Gasket, 1 Insulator, 1 Lockwasher, 1 Nut

All specifications

112581 additional specifications
ParameterValue
Impedance50 Ohms
PackageBag
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

What This BNC Jack Kit Includes and Where It Fits

Rated for 500 mating cycles, so it handles regular reconnection in a lab or production test fixture without the gold plating wearing through.

The cable group is RG-402 (.141" semi-rigid), so the centre conductor and dielectric dimensions are matched to the connector's PTFE insulator. The contact termination is solder — you tin the centre conductor and flow solder through the hole in the contact pin. No crimp tool needed, but the solder joint must be clean to keep the impedance transition from reflecting at the interface.

Mounting and Hardware

Mounts through a panel cutout with the bulkhead front-side nut — the connector body passes through from the outside, and the hex nut and lockwasher clamp it from behind. The gasket seals the panel interface against dust and splash, though there is no IP rating stated. Body is nickel-plated brass; the housing colour is gold (the nickel gives the gold a warm tone). The centre contact is gold-over-nickel on phosphor bronze — the gold handles the 500-cycle mating life, and the phosphor bronze spring keeps contact force consistent over temperature swings in an unheated equipment room.

The 112581 shares the same 50 Ohm, 4 GHz, 500-cycle, 500 V rating as the 112553 and 112536. The difference is the housing colour — gold on the 112581 versus silver on the 112553 and 112536 — and the packaging: the 112581 ships in a bag, while the 112536 ships in a tray. The 112553 also ships in a bag and is silver. Otherwise the electrical and mechanical performance is identical across all three.

MPN
112581