Skip to main content
Amphenol 122351

Amphenol RF 122351 TNC to TNC Adapter, 75 Ohm, 1 GHz

MPN 122351
Active

Amphenol RF TNC to TNC adapter, 122351, straight plug-to-plug, 75 Ohm impedance, 1 GHz max frequency, nickel-plated brass body, gold center contacts, free-hanging in-line.

$7.1000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

122351 specifications
ParameterValue
Adapter typePlug to Plug
MountingFree Hanging (In-Line)
Adapter seriesTNC to TNC
Fastening typeThreaded, Threaded
Conversion typeSame Series
Frequency - max1 GHz
Body materialBrass
Dielectric materialPolyoxymethylene (POM) Acetal
Center contact materialBrass
StyleStraight
PackageBag
Impedance75 Ohms
Body finishNickel
Center genderMale to Male
Center contact platingGold
Convert to (Adapter end)TNC Plug, Male Pin
Convert from (Adapter end)TNC Plug, Male Pin

Product details

75 Ohm TNC Barrel for In-Line Signal Routing

The Amphenol RF 122351 is a TNC to TNC adapter — a straight plug-to-plug barrel that joins two male TNC connectors end-to-end. It's a same-series adapter, meaning both ends are TNC, so it extends a cable run or couples two cable assemblies without changing the interface. The body is free-hanging (in-line), threaded on both ends, and built for a 75 Ohm system — not the 50 Ohm you see on most TNC gear, so check your cable and equipment impedance before you commit. Rated to 1 GHz, this adapter handles the typical CATV, broadcast video, and telecom signal bands where 75 Ohm is standard. The nickel-plated brass body and gold-plated brass center contacts keep the signal path clean and resist corrosion in indoor or protected outdoor racks.

What the 75 Ohm Rating Means on the Bench

75 Ohm TNC adapters are less common than 50 Ohm — most TNC hardware is built for 50 Ohm RF systems (cellular, Wi-Fi, two-way radio). The 122351 is specced for 75 Ohm, which means the center conductor and dielectric geometry are sized for that impedance. If you drop this into a 50 Ohm line, you'll get a mismatch bump at the adapter, which eats into your return loss budget. Keep it in a 75 Ohm path — CATV headend, video distribution, or any broadcast-grade coax — and it behaves as a straight pass-through.

Male or Female? Both Ends Are Male Pin

Both ends of the 122351 are TNC plug, male pin — center gender is male-to-male. So it mates with two TNC jacks (female) on your cables or bulkhead connectors. If you need a female-to-female or male-to-female barrel, this isn't it. The threaded fastening on both sides means you wrench it down finger-tight plus a quarter turn with a 11/16-inch hex — no torque spec to chase, just snug.

MPN
122351