Skip to main content
Amphenol 132121

Amphenol RF 132121 SMA Jack, 50 Ohm, 12.4 GHz, Panel Mount

MPN 132121
Active

Amphenol RF SMA jack, 132121, 50 Ohm, 12.4 GHz, panel mount flange, gold body, crimp shield, solder contact, weatherproof, RG-174/188/316/LMR-100.

$12.8200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

132121 key specifications
ParameterValue
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating375 V
Frequency - max12.4 GHz
IP ratingWeatherproof
Mounting featureFlange
Cable groupRG-174, 188, 188A, 316, LMR-100, M17/119-RG174
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)

All specifications

132121 additional specifications
ParameterValue
Center contact materialBeryllium Copper
PackageBag
Includes4 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Heat Shrink
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

SMA Panel-Mount Jack for Field Termination

The 132121: The crimp shield termination and solder center contact make it practical for field or bench assembly on small-diameter coax like RG-174, RG-188, RG-316, and LMR-100. Rated to 12.4 GHz, it covers Wi-Fi, ISM bands, GPS, and most comms links up to that ceiling. The gold body finish and gold-plated beryllium copper center contact hold up to 500 mating cycles in weatherproof outdoor installations.

This SMA jack is built for RG-174, RG-188, RG-188A, RG-316, LMR-100, and M17/119-RG174 — the standard thin flexible coax used in patch cables, pigtails, and short antenna leads. The shield is crimped, the center conductor soldered. The kit includes a ferrule and heat shrink to seal the cable entry, which works with the weatherproof rating to keep moisture out of the interface. For semi-rigid cables like RG-402 or RG-405, look at the 132102 or 132111 plugs in the same series — those use solder shield termination instead of crimp.

What the 12.4 GHz Ceiling Means

Standard SMA connectors are typically rated to 18 GHz, but the 132121 is specified to 12.4 GHz. That's not a flaw — it's the trade-off for using a crimp shield termination, which is faster to install in the field than a solder shield but introduces a small impedance bump at higher frequencies. For applications below 12.4 GHz — 5G sub-6, Wi-Fi 6E, ISM, GPS /L2, and most two-way radio bands — this connector performs identically to a full 18 GHz part. If you need the full SMA bandwidth up to 18 GHz, the 132102 or 132111 plugs in the same series are rated there, but those use solder shield termination and require a different cable prep.

MPN
132121