SMB / Fakra Jack for RF Harness Builds
It carries the Code F keying variant, which means the housing colour and mechanical keying are set for a specific Fakra position — Code F is one of the standardised colour-coded keying options used in automotive RF harnesses to prevent mismating between different signal paths (e.g., GPS vs. SDARS vs. cellular).
For the harness builder: the crimp die selection needs to match the cable jacket OD — the listed cables range from about 0.100" to 0.110" diameter, so a standard RG-174/RG-316 crimp die set will work across the group.
The connector mates with a corresponding SMB / Fakra plug (male pin) of the same Code F keying.