Skip to main content
Log in
Amphenol 55101-G17-02 — Pin Headers, Sockets & Housings

Molex BERGSTIK 55101-G17-02 Header, 2 Pos, 0.100" Pitch

MPN55101-G17-02
Obsolete

Molex BERGSTIK Series, Board to Board Header, 55101-G17-02, 2 Positions, 1 Row, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Solder Termination, Gold GXT Mating Finish.

$0.5200Ref. price · indicative, final on quote
Amphenol 55101-G17-02 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

55101-G17-02 key specifications
ParameterValue
SeriesBERGSTIK®
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.140\" (3.56mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

55101-G17-02 additional specifications
ParameterValue
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions2
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Rated 5A per circuit and 110V, it's suited for low-current signal or power jumpers on a PCB.

Typical mating halves include Molex KK or C-Grid series receptacles, or any generic 2-position female connector on the same pitch.

Board Layout Note

The right-angle orientation puts the pin row parallel to the board surface, with a mating pin length of 0.230" (5.84mm) and a post length of 0.120" (3.05mm) below the insulator. The insulation height is 0.140" (3.56mm) above the board. For a 2-position part, the overall width across the pins is just 0.100" — the footprint is tight.

Frequently asked questions

Where can I buy the 55101-G17-02?

The 55101-G17-02 is obsolete and no longer in factory production. It is sourced through independent distribution and quoted to order against an RFQ — current availability and pricing are confirmed at quote time.

What is the replacement for 55101-G17-02?

No official replacement order code is listed by Molex for this part. A functionally equivalent substitute would need to match the 2-position, 0.100" pitch, right-angle, unshrouded header format with gold GXT plating. Active BERGSTIK headers in the same footprint are available — verify the contact finish thickness and mating pin length before substituting.

What are the specifications of the 55101-G17-02?

It is a 2-position, single-row, unshrouded male pin header on 0.100" (2.54mm) pitch. Through-hole, right-angle mounting with solder termination. Rated 5A per circuit at 110V. Gold GXT mating finish at 30.0µin (0.76µm) over phosphor bronze contacts. UL94 V-0 rated black housing.