Skip to main content
Log in
57102-G08-08
Amphenol

57102-G08-08 Amphenol ICC Minitek® 2.00mm Header, 16 pos

MPN57102-G08-08
Obsolete

Amphenol ICC (FCI) Minitek® 2.00mm series, 57102-G08-08, unshrouded male pin header, 16 circuits in two rows, 2.00 mm pitch, through-hole solder termination, gold GXT™ mating finish, rated 2 A per contact at 200 V.

$1.9100Ref. price · indicative, final on quote
57102-G08-08 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

57102-G08-08 Technical Specifications
ParameterValue
SeriesMinitek® 2.00mm
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating200V (AC/DC)
Current rating2A (AC/DC)
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.059\" (1.50mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions16
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.118\" (3.00mm)
Overall contact length0.335\" (8.51mm)
Contact finish - matingGold, GXT™
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board-to-Board Header in the Minitek® 2.00mm Family

This is a signal-duty header, not a power interconnect.

Termination is through-hole solder only — no press-fit option.

What Replaces 57102-G08-08?

No official successor part number is recorded from Amphenol ICC (FCI). The base product number 57102 covers multiple position counts and plating options within the Minitek® 2.00mm header family. A functionally similar header would share the 2.00 mm pitch, dual-row layout, and through-hole termination — but the exact 16-position, gold GXT™, unshrouded variant is not cross-referenced to a current production code. For a drop-in replacement, the buyer should verify the mating pin length (0.157") and post length (0.118") against the board stack-up.

Frequently asked questions

Is 57102-G08-08 obsolete?

Yes, the lifecycle status is Obsolete per Amphenol ICC (FCI). No direct replacement has been announced.