Skip to main content
Log in
57202-G52-11ALF — Amphenol product photo
Amphenol

57202-G52-11ALF Minitek 2.00mm 22-Pin SMT Header

MPN57202-G52-11ALF
Active

Amphenol ICC (FCI) Minitek® 2.00mm, 22-position, dual-row unshrouded header, surface-mount, 2A, Gold GXT™ mating finish, push-pull fastening, UL94 V-0.

$1.6455Ref. price · indicative, final on quote
57202-G52-11ALF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

57202-G52-11ALF Technical Specifications
ParameterValue
SeriesMinitek® 2.00mm
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typePush-Pull
Voltage rating200V (AC/DC)
Current rating2A (AC/DC)
Contact materialCopper Alloy
Insulation colorBlack
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageTape & Reel (TR)
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions22
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact finish - matingGold, GXT™
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

2.00mm pitch, 22 positions — board-to-board signal routing

The 57202-G52-11ALF: This is a 22-position, dual-row unshrouded header from the Minitek® 2.00mm series, built for board-to-board stacking. The 2.00mm pitch and 0.079" row spacing set the PCB footprint — a tight enough pitch to save board area while still allowing easy routing for signal traces. Rated 2A per contact at 200V AC/DC, with a 0.157" mating pin length that gives a solid wipe before the push-pull interface seats.

Surface-mount termination, unshrouded push-pull

Push-pull fastening keeps insertion force low; there is no latch to align, which speeds up manual assembly but means the joint relies on the solder pads for mechanical retention against cable strain.

Frequently asked questions

What is the mating half for this header?

As an unshrouded header, it mates with any Minitek® 2.00mm receptacle that matches the 22-position, dual-row layout and 2.00mm pitch. The push-pull interface means no locking latch — confirm the receptacle's retention method for your vibration environment.

Where can I buy 57202-G52-11ALF?

Sourced to order against your BOM quantity through independent distribution. Availability and current pricing confirmed at quote time.