The Amphenol RF 60030-000 is a strain-relief accessory designed specifically for RG-59 coaxial cable. Its black Polyvinyl Chloride (PVC) body grips the cable jacket behind the connector, transferring pull and flex loads away from the crimp or compression joint. This prevents the centre conductor from backing out of the pin and keeps the braid from tearing at the termination point — a common failure mode in field-run coax that sees routine handling or vibration. It is a bagged accessory, not a connector — the BOM line for a coax assembly should pair this with the matching Amphenol RF RG-59 plug or jack. The PVC material is flexible enough to conform to the cable OD but rigid enough to hold its shape under a clamped boot or heat-shrink overmould.
Cable Fit — RG-59 Specific, Not Universal
This strain relief is dimensioned for RG-59 cable only. The family includes siblings for other coax types: the 60015-000 fits RG-58, and the 60052-000 fits RG-174. The inner bore and grip geometry differ per cable diameter and jacket durometer — swapping one for another risks a loose fit that does not actually relieve strain, or a too-tight bore that crushes the dielectric. Match the cable type on your assembly drawing before committing.