Skip to main content
Log in
Amphenol 65801-110LF — FFC / FPC Cable Assemblies

65801-110LF Amphenol ICC (FCI) Clincher™ 10-Pin FFC/FPC

MPN65801-110LF
Active

Amphenol ICC (FCI) Clincher™ series, 65801-110LF, 10-position CIC receptacle, 0.100" (2.54mm) pitch, ZIF slide-lock actuation, tin-plated contacts rated 2 A at 500 V, free-hanging (in-line) solder termination, accepts 0.30mm/0.33mm flex.

$2.1200Ref. price · indicative, final on quote
Amphenol 65801-110LF datasheet (PDF)
RoHSRoHS Compliant
SeriesClincher™
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

65801-110LF key specifications
ParameterValue
SeriesClincher™
MountingFree Hanging (In-Line)
Cable end typeStraight, Tapered
Flat flex typeCIC
Connector (Contact type)Receptacle
Voltage rating500V
Current rating2A
Operating temperature-65°C~105°C
Housing colorBlue
Actuator colorBlack
Contact materialCopper Nickel Alloy
Housing materialThermoplastic

All specifications

65801-110LF additional specifications
ParameterValue
Material flammability ratingUL94 V-0
Pitch0.100\" (2.54mm)
PackageTray
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles100
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions10
Contact finish thickness100.0µin (2.54µm)

Product details

The 65801-110LF is a 10-position CIC (Conductor-Insulation-Conductor) receptacle from the Clincher™ series, designed for free-hanging (in-line) termination of flat flex cable. No secondary latch is needed; the lock holds positive retention under vibration. The 100.0 µin tin contact finish is cost-optimised for low-cycle applications — 100 mating cycles minimum.

Flex Cable Fit and Termination

Accepts FFC/FPC thicknesses of 0.30 mm and 0.33 mm — two common flex gauges — without tooling change. The cable end type is straight or tapered, giving flexibility in cable routing. Termination is solder: the contact tails are soldered directly to the flex circuit pads. Contact material is copper nickel alloy.

RoHS compliant. Sourced through independent distribution channels.

Frequently asked questions

Where can I buy the 65801-110LF and what is the lead time?

Submit an RFQ for current pricing and delivery.

Is the 65801-110LF a ZIF connector?

Yes. The 65801-110LF uses a Zero Insertion Force (ZIF) mechanism with a slide lock. The actuator opens the contact beams so the flex cable inserts without pad damage, then the slide lock clamps the cable in place.

What is the difference between the 65801-110LF and the 65801-118LF?

The only difference is position count: the 65801-110LF has 10 positions, while the 65801-118LF has 18 positions. Both share the same 0.100" (2.54mm) pitch, tin finish, ZIF slide lock, 2 A rating, and 100 mating cycles.