Skip to main content
Log in
65863-185
Amphenol

65863-185 Quickie™ Header, 20-Pos, 0.100" Pitch, Gold

MPN65863-185
Active

Amphenol ICC (FCI) Quickie™ series, 20-position dual-row shrouded header, 0.100" (2.54mm) pitch, through-hole solder termination, 30.0µin gold or GXT™ on mating contacts, latch lock/eject hooks, UL94 V-0 blue thermoplastic housing.

$1.9154Ref. price · indicative, final on quote
65863-185 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

65863-185 Technical Specifications
ParameterValue
SeriesQuickie™
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLatch Lock/Eject Hooks, Short
Contact materialPhosphor Bronze
Insulation colorBlue
Insulation height0.640\" (16.26mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions20
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.150\" (3.81mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

20-Position Dual-Row Shrouded Header with Latch Lock

The 65863-185: The phosphor bronze base material resists stress relaxation under repeated insertion. Latch lock/eject hooks on the short side of the housing provide a positive mechanical lock when mated with the corresponding Quickie™ receptacle. This locking feature keeps the pair engaged under vibration up to the connector's rated retention force — no secondary clip needed.

Through-Hole Termination and Board Standoff

The 0.150" (3.81mm) solder tail length suits standard 0.062" to 0.093" PCBs — the post protrudes through the board far enough for a reliable solder fillet without bottoming out against the housing. Insulation height of 0.640" (16.26mm) above the board leaves clearance for components beneath the mated connector pair.

Frequently asked questions

How can I order the 65863-185 or check stock?

The 65863-185 is active and sourced to order. Submit an RFQ with your target quantity and lead-time requirement — we confirm availability and current pricing from our distributor network at quote time. No stock-holding claim; every order is sourced fresh.

What is the closest pin-compatible alternative to 65863-185?

No official cross-reference or equivalent is listed on the record. The 65863 base product number covers multiple position counts and plating options — confirm the 20-position, 0.100" pitch, and 30µin gold finish match your BOM before substituting any sibling.